GreenWorks Tools 2402707 Manual De Utilización página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
1. Slide the Power/Speed slide switch to the OFF posi-
tion, and wait until the unit comes to a complete stop.
2. Unplug the unit.
3. Remove the blower tube or mulcher tubes and the
bag.
4. Carefully remove material blocking the tube or
impeller. Inspect the blades to ensure no damage
has occurred. Rotate the impeller blades by hand to
ensure the blockage is completely cleared.
5. Reinstall the blower tube or mulcher tubes and the
bag.
6. Plug the unit back into the power supply.
MAINTENANCE
WARNING
Never use water for cleaning your product, use only
a dry cloth.
WARNING
When servicing use only identical replacement
parts. Use of any other parts may create a hazard
or cause product damage.
Switch off and disconnect from the mains power
supply before cleaning your product.
Always empty the collection bag.
Always store the product in a dry place ensuring
the cable is not likely to be damaged.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
leum based products, penetrating oils, etc. come in
contact with plastic parts. They contain chemicals
that can damage, weaken or destroy plastic.
WARNING
Do not attempt to modify this tool or create acces-
sories not recommended for use with this tool. Any
result in a hazardous condition leading to possible
serious personal injury.
English (original instructions)
STORING THE BLOWER
Prior to cleaning or any maintenance, always ensure
the power plug has been removed from the electric
power supply.
When you have finished using the blower vac, always
check to make sure the product is clean and free of
dirt and debris. It is especially important to check and
clear debris around the quick change lever. To check
this area, remove the collection bag and ensure the
discharge side of the tube is free of debris and dirt.
Operate the selector lever backwards and forwards to
ensure correct operation.
Do not use solvents to clean the tool.
Store the tool in a dry place, and out of reach of
children.
POWER CORD MAINTENANCE
If the supply cord needs replacing, the task must be
carried out by the manufacturer, the manufacturer's
agent, or an authorised service centre in order to avoid
a safety hazard.
3

Publicidad

Tabla de contenido
loading

Tabla de contenido