Celestron 44330 Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Figure 5a
Before using your microscope for viewing on your computer screen or imaging,
you will have to ensure the driver is recognized by your computer. Your
microscope is a "Plug and Play" type where the computer should automatically
recognize the driver type on Windows XP and Vista (32 and 64) Operating
Systems as well as MAC computers operating on Version 10.4.9 and higher.
Plug the USB cable of the digital camera into the USB port of your computer.
Each computer system will have slightly different messages when you attach the
digital camera. For example, on some Vista OSs when plugged in the message
may say "Installing Device Driver Software" and shortly thereafter you may see a
message "Your Devices Are Ready to Use". Just follow any instructions shown
on the screen.
You will need to install the ArcSoft software to actually view and/or image and
prior to doing this you will need to unplug the USB cable. Note that if using a
MAC computer you will need to have an image capture program for your MAC as
ArcSoft will not work on MAC computers.
Installing the Viewing and Imaging Software
Your microscope comes with the ArcSoft Software CD-ROM which allows you to
use your microscope for visual purposes and for imaging with your computer.
Before installing the software, remove the USB cable of the Digital Camera from
your computer and do not connect it until the software installation is complete.
Insert the CD-ROM into your CD-ROM drive and it should automatically begin.
Messages will appear (each operating system may show something somewhat
different) to guide you through the installation process.
If the software did not begin automatically, double click on (My) Computer and
right click the CD-ROM icon and it should start.
You will see "Files Currently on the CD" and notice "ArcSoft" as one of
the folders – other folders will be Web Companion, Help, 44306
Instructions, and 44330 instructions. Double click on "ArcSoft" and then
among the choices double click on "Setup" (InstallShield Setup
Launcher).
Figure 5b
6
Figure 5c

Publicidad

Tabla de contenido
loading

Tabla de contenido