Technical Data - SEDEA SNT-2002-HD Guía De Instalación Rápida

Installation
1- Connect the decoder to an electrical
outlet. Make sure that the voltage of
your home corresponds to the voltage
indicated on the rating plate of the device
2 - Antenna (RF IN): Use a coaxial cable
to connect the receiver to the terrestrial
antenna.
3 - TV: Use an HDMI cable or a SCART
cable to connect the receiver to your TV
set.
Caution: HD (high definition) resolution will
only be obtained with an HDMI cable.
PROGRAMMING THE RECEIVER
1 - Press the «POWER» (ON/OFF) button
to turn on the receiver. The following
start-up screen should be displayed:
2 - 2 - Use the «LEFT» and «RIGHT» keys
to change a setting. Use the «UP» and
«DOWN» keys to navigate through the
menu:
- First, choose the language in which the
menus are displayed and the country of
installation.
- 5 volt power supply: Activate this
function to power an amplified antenna.
Deactivate this function if your antenna
is passive.
- LCN (Automatic Channel
Classification): we recommend that you
set this parameter to Auto.
3 - 3 - Use the «DOWN» button to move
to «Channel Search» and press the «OK»
button to start the search:
Once the search is complete, the
channels are saved and the first channel
is displayed.

Technical data

Digital tuner
- Reception: DVB-T2
- Frequency band: 170 ~ 230 & 470 ~ 860 MHz
- Demodulation: QPSK, 16QAM, 64QAM,
256QAM
- Bandwidth: 7 and 8 MHz
- RF input level: -25 ~ 82 dBm
Power supply
- 100~240 VAC 50/60Hz
- Max. power consumption : 7,5W
- Standby power consumption: < 1W
Audio / Video
- Video decoder : MPEG4 AVC/H.264
HEVC/H.265 HP@L4 MPEG2 MP@ML.HL
- Audio decoder: MPEG-1
- Video output: 4:3/16:9/Auto
- Video resolution: 576P , 720P, 1080i, PAL/
NTSC