Introduction..................................................................... 4
Safety..............................................................................5
Assembly........................................................................ 7
Installation.......................................................................8
Operation........................................................................ 8
Product description
This product is a portable generator with a combustion
engine.
Product overview
(Fig. 1)
1. Fuel valve
2. Choke
3. Air filter
4. Starter rope handle
5. Wheel
6. Battery
7. Power switch
8. Handle
9. Frame
10. Fuel gauge
11. Fuel tank cap
12. AC circuit breakers
13. VFT meter
14. Ground terminal
15. AC receptacle
12 V DC terminal
The 12 V DC terminal is a power source for 12 V DC
units.
(Fig. 2)
VFT meter
The VFT meter shows the voltage, frequency and total
operation time of the product.
(Fig. 3)
AC receptacles
The product has several AC receptacles to give power
to tools and equipment. The AC receptacles are different
in different market areas.
EU, 1-phase, 50 Hz
A: 2-Prong, 230 V receptacle.
4
Contents
Maintenance................................................................... 9
Troubleshooting............................................................ 11
Technical data.............................................................. 13
Introduction
Intended use
The product supplies electrical power to operate
electrical loads in locations where there is no electrical
power available. Do not use the product for other tasks.
B: 3-Prong, 32 A 230 V receptacle.
(Fig. 4)
US, 1-phase, 60 Hz
A: 3-Prong, duplex 120 V receptacle.
B: 4-Prong, twist lock 30 A 120/240 V receptacle.
C: 4-Prong, 50 A 120/240 V receptacle.
(Fig. 5)
US, 3-phase, 60 Hz
A: 3-Prong, duplex 110 V receptacle.
B: 5-Prong, 3-phase 127/220 V receptacle.
(Fig. 6)
CN, 1-phase, 50 Hz
A: 3-Prong, twist lock, 230 V receptacle.
(Fig. 7)
Symbols on the product
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
WARNING! Be careful and use the product
correctly. This product can cause serious
injury or death to the operator or others.
Read the operator's manual carefully and
make sure you understand the instructions
before you use this product.
Risk of fire or explosion.
Risk of carbon monoxide poisoning. Do not
operate the product in areas with bad
airflow.
Risk of electrical shock.
1420 - 002 - 02.03.2020