Lock Function; Automatic Memory Function; Error Report - AllPondSolutions AQUAFLO-PP RANGE Manual Del Usuario

FEEDING MODE
Press and hold
appear on the screen. The devise will start to work after ten minutes. Press and
hold for 3 seconds to exit feeding mode.

LOCK FUNCTION

Press and hold
hold to unlock the keys.

AUTOMATIC MEMORY FUNCTION

If the power to the controller is accidentally switched off, the unit will recover
the last settings when the controller is switched back on.

ERROR REPORT

if the pump is run dry without water for more than 30 seconds, the unit will
temporarily switch off, attempting to restart after 3 seconds. This will repeat 5
times before power to the unit will shut off completely.
Er03 - this will display on the screen when the pump has been
automatically stopped.
Er02 - this will display if the pump stops working due to a blockage.
CODE
P000
Sp01 - 10
Fd10-01
_LOC
Er01
Er02
Er03
Er04
Er05
for 3 seconds to enter time delay start mode, and Fd10 will
to lock the keys - LOC will appear on the screen. Press and
DEFINITION
Power
Flow Rate Level
Feeding Mode
Lock
Over or Under Voltage
Pump Lock Protection
Pump Idling Protection
Overheating
Short Circuit Current
STATUS
Normal
Normal
Normal
Normal
Warning Check the voltage is
corect
Warning Check for blockage in the
pump
Warning 1. Check if the pump is
being run dry
2. Check wihether there is
air in the pump
Warning Clean the pump
Warning Check the controller
TROUBLESHOOT