Comelit UT9279M Manual De Programación página 11

◊ Video call: when the universal access code is entered on the number keypad, a video call is made to
the address entered in the "Address" field.
• Address: select the address to which you want to make the video call (from 1 to 240).
• Number of calls: select the number of calls to make to the address entered in the "Address" field (System
settings or from 1 to 10).
◊ Activate keypad relay: enter the universal access code to activate the number keypad relays.
• Select relay: select the relay you want to activate (Relay 1 or Relay 2).
◊ Actuator control: enter the universal access code on the number keypad to activate an actuator.
• Address: enter the address of the actuator to be activated (from 1 to 255).
◊ Control on Ultra bus (UDB): enter the universal access code on the number keypad to send a
command over the Ultra bus (default).
• Output: select the output you want to activate on the audio or audio/video module to which the number
keypad is connected (module SE output, default, or module relay output).
• Type: Audio/video module (cannot be selected).
◊ None: select this option to disable actions.
NOTE: If "Audio call" or "Video call" is selected in any "Action 1 (2, 3, 4) Universal Code" menu, the latter
will no longer be shown as a potential selection in the other Action menus relating to the Universal
Code.
RELAY SETTINGS
Relay 1 (2)
• Activation type: select the operating mode for relay (Monostable or Bistable, default: Monostable).
• Relay activation time (s): select the relay activation duration (from 1 to 99 seconds, default: 2 seconds,
only if Monostable "Activation type" has been selected).
• Buzzer activation time (s): if you want to hear a confirmation tone when the relay is activated, enter a
duration (from 0 to 9 seconds, default: 0, deactivated).
CLOCK INPUT SETTINGS
This function uses the internal number keypad clock (or an external clock) to enable the "Key" button to
activate Relay 1 in specific time bands, or to authorise opening by means of an access code in specific time
bands only.
Clock input settings
• Clock input: select the operating mode.
◊ Disabled: the Clock input is ignored.
◊ Enabled: when the "Key" button is pressed, Relay 1 is activated (default).
◊ Access codes enabled with Clock on: the access codes are only enabled when the Clock input is
active. The universal access code is not affected by these settings and is always enabled. This option is
only applicable if a time band has not been assigned to the codes in the "Directory" menu.
◊ Paired with "Relay 2 functions": Clock input behaviour depends on "Relay 2 functions" menu settings.
• Relay 2 functions: this menu is only present if the option "Paired with Relay 2 functions" has been
selected in the "Clock input" menu.
◊ Disabled: the function is not enabled (default).
◊ Enabled: when the "Key" button is pressed, Relay 2 is controlled regardless of Clock input status.
◊ Enabled if Clock input on: when the "Key" button is pressed, Relay 2 is only controlled if the Clock
input is active.
"Trade" function.
On specific days of the week and within specific time bands, Relay 1 can be activated simply by pressing the
button with the Key symbol, and therefore not entering any codes.
• Enable time band 1 (2): the "Key" button activates Relay 1 in the time bands specified in the "Validity start
time", "Validity end time" and "Validity days" menus (disabled by default).
• Validity start time: set the start of the time band.
• Validity end time: set the end of the time band.
• Validity days: select the days on which the time bands are enabled.
11