Comelit UT9279M Manual De Programación página 9

SEARCHING FOR DEVICES TO CONFIGURE
√ Connect the number keypad to the computer and open ViP Manager
1. In Options (1) - Local connections (2), select the network interface "Remote NDIS Compatible Device" (3)
2. Confirm by pressing OK (4)
3. Click Scan system (5) to start searching for devices
4. Select "Electronic Key"
SETTINGS
GENERAL
• Number of characters: number of characters making up the access codes (between 4 and 6, default: 5).
• Backlighting: number keypad backlighting management mode.
◊ Guided by audio/video module: follows the settings for the audio/video module to which it is
connected (default).
◊ Timed: backlighting is always off. It comes on for 20 seconds when any button is pressed.
◊ Always on: backlighting is always on.
9