Software Update; Update Procedure - Samsung HW-Q600A Manual De Instrucciones

11 SOFTWARE
UPDATE
Samsung may offer updates for the Soundbar's
system firmware in the future.
USB port
USB (5V 0.5A)
DC 24V
If an update is offered, you can update the
firmware by connecting a USB device with the
firmware update stored on it to the USB port on
your Soundbar. For more information about how
to download update files, go to the Samsung
Electronics website at
www.samsung.comSupport.
Then, select the product type or enter the model
number of your Soundbar, select the Software &
Apps option, and then Downloads. Note that the
option names can vary.
HDMI
HDMI TO TV
(ARC)
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)

Update Procedure

After the update completes, all your customized
user settings are maintained.
1. Connect a USB thumb drive to the USB port
on your computer.
Important: Make sure there are no music
files on the USB thumb drive. This may cause
the firmware update to fail.
2. Go to (samsung.com)
Number and enter the model of your
Soundbar. Select manuals and downloads
and download the latest software file.
3. Save the downloaded software to a USB
stick and select "Extract Here" to unzip the
folder.
4. Turn off the Soundbar and connect the USB
stick containing the software update to the
USB port.
5. Power on the Soundbar, press the
(Source) button on the Soundbar, and
then select the "USB" mode. "UPDATE"
appears on the display, starting the update.
Soundbar is rebooted automatically when
the update is completed.
• This product has a DUAL BOOT function.
If the firmware fails to update, you can
update the firmware again.
• During update, do not turn it off or
remove the USB.
• If the latest version is already installed on
the Soundbar, the update will not install.
• Depending on the USB type, update may
not be supported.
6. Restore your settings on the Soundbar.
ENG - 33
select Enter Model
