HAMPTON BAY FZ10-19M Manual De Instrucciones página 3

ASSEMBLY INSTRUCTIONS
1. Take out the fan body and the spare parts from the box. Put the front base onto
rear base and join them together. (See Fig. 1)
2. Pass the power cord through the flute, then insert the fan body into the base.
(See Fig. 3)
3. Fix the fan body on the base with the plastic nut. (See Fig. 2)
Fig.1
Fig.2
OPERATION INSTRUCTION
High speed of air flow
Body oscillating switch
1. Speed setting knob
The knob points to "0" when the fan is not turned on. After plug in, turn the knob
clockwise to set high, medium and low speed.
2. " " OSC key
After the fan has started working, press this key，the fan will start oscillating from
left to right. Press it again to stop the oscillation.
The outlet trough
Off
Fig.3
Medium speed of air flow
Low speed of air flow
2