Hergom FIRE PIT Instrucciones Para Instalación, Uso Y Mantenimiento página 22

You can choose whether the support base where you place the bowl is:
 Low and painted cast iron (Code: 1300101)
 High and painted steel (Code: 1300102)
In any case, the base you have chosen must always be placed on a rigid, fireproof
and level surface, such as cement, stone or metal, and located at the distances to
flammable materials as described in the safety section (+3m)
Once the base is placed in the chosen location, place the bowl on it, centring it in
its position.
The two-piece firebowl is attached at the factory and weighs a substantial amount
(75 kg). Four people are recommended to handle the firebowl.
It is very important that you level the set, especially if you are going to cook on
the griddles. Use the levelling screws on the base to level the assembly.
Note:
Levelling must be carried out in such a way that the screws stick out as little as possible
from the base so that the stress due to the weight is bearable by the screws.
LOW CAST IRON BASE
If your base is low and made of cast iron, install the ashtray tube
that comes with it and place it in the centre hole of the firebowl.
Place the stop pin perpendicular to the direction of the bowl's connection
on the base.
HIGH STEEL BASE
The high steel base does not come with an ashtray. Ash coming from the central hole will remain in
the base, which acts as an ashtray under the firebowl.
Clean any excess ash before lighting it again to allow air to enter through the protective cover. Use
brushes or a special vacuum cleaner for ashes.
22