Instructions
Instructions in this user's guide are based on handsfree
buttons and phone keys. For example, the
or the
key on the phone can be used to answer a call.
YES
To turn the handsfree on
• Press and hold the
low tone followed by a short high tone.
The handsfree indicator light flashes green. If the
battery is low, the light flashes red.
Note: The first time the handsfree is turned on it
will automatically be ready for pairing.
To turn the handsfree off
• Press and hold the
high tone followed by a short low tone. The handsfree
indicator light is switched off.
Pairing the handsfree
Before you start using the handsfree for the first time,
you must pair the handsfree with the device you want
to use it with, for example, a mobile phone. This
section describes three ways of pairing the handsfree:
• With an Ericsson phone with built-in Bluetooth capability.
button
button until you hear a short
button until you hear a short
• With an Ericsson phone with a Bluetooth phone
adapter attached.
• With another Bluetooth device or non-Ericsson phone.
Using an Ericsson phone with built-in
Bluetooth capability
You pair the handsfree with your phone by adding it
to a list of paired devices in the phone. They then
recognize each other when they connect.
To pair the handsfree with the phone
1. With the handsfree turned off, press and hold both the
and
buttons for up to 10 seconds until the
indicator light on the handsfree flashes green and red.
2. In the phone, scroll to Extras or Connect,
Bluetooth,
, Paired devices,
YES
Phone initiates,
.
YES
3. A list of device types that you can pair with your phone
appears. Scroll to Headset and press
the handsfree and the phone are not too far apart.
4. HBH-20 appears in the display. Press
5. Enter the handsfree passkey (0000) and press
The phone pairing procedure starts.
6. You may now replace the given handsfree name with
a personal name tag and then press
,
YES
, Add device,
,
YES
YES
. Make sure
YES
.
YES
.
YES
. When pairing
YES
English
5