Ericsson HBH-20 Manual De Instrucciones página 8

has been completed, the handsfree indicator light
flashes green.
Note: The handsfree passkey is 0000.
Using an Ericsson phone with a Bluetooth
adapter attached
You pair the handsfree with your phone adapter by
adding it to a list of paired devices in the phone. They
then recognize each other when they connect.
To pair the handsfree with the phone adapter
1. Attach the Bluetooth adapter to the phone and turn
on the phone.
2. With the handsfree turned off, press and hold the
and buttons for up to 10 seconds until the
indicator light on the handsfree flashes green and red.
3. Scroll to Extras or Connect,
DBA-10, , Paired devices,
YES
device?. Make sure the handsfree and the phone are
not too far apart.
4. Press
on the phone. The pairing procedure starts.
YES
5. HBH-20. Add to paired devices? appears. Press
6. Enter the handsfree passkey (0000) and press
When pairing has been completed, the handsfree
indicator light flashes green.
6 English
, Accessories, ,
YES YES
, Headset, , Add
YES YES
YES
YES .
Using another device or a non-Ericsson phone
The device or phone must have Bluetooth capability
and support the Headset profile.
To pair the handsfree with another device
1. Activate the Bluetooth function in the other device if
necessary. To do this, please refer to the user
documentation for the device.
2. With the handsfree turned off, press and hold the
and
indicator light on the handsfree flashes green and red.
Make sure the handsfree and the other device are not
too far apart.
3. Initiate Bluetooth pairing in the other device to pair it
with the handsfree. To do this, please refer to the user
documentation for the device.
When asked, enter the handsfree passkey (0000) and press
the accept key or its equivalent.When pairing has been
completed, the handsfree indicator light flashes green.
.
buttons for up to 10 seconds until the