Part #589; Qty. 4 - Bestop 77332 Manual Del Usario

Section 1
Assemble Side Rails; Remove Paper Backing from Foam Tape
Step 1
Step 1
Locate the Foam Tape on the Left
and Right Side Rails, and remove the
paper backing from the foam tape.
Repeat with the both Side Rails.
P5 - 77332 Rev. C 1219
Hardware
Set Screw
Part #573.17

Qty. 4

Front Side Rail
Part #589.91 - Left (shown)
Part #589.92 - Right
Qty. 1 of each
Rear Side Rail
Part #589.57 - Left (shown)
Part #589.54 - Right
Qty. 1 of each
Tools
1/8" Allen
Wrench
Torque Wrench
Installation Instructions - Supertop for Trucks
Step 2 573.17 589.91
Check and Tighten Set
Screws in Rear Rail
Step 2
Assemble the Left Front Side Rail #589.91 and
the Left Rear Side Rail #589.57.
Slide the rails together, and secure
using two set screws #573.17.
Check and tighten the two (2) set screws in
the rear rail. Tighten set screws to 35 in-lbs
torque.
Repeat with the Right Side Rails.
Page 5
589.92 589.54
589.57
Set Screws
#573.17
© 2019 Bestop, Inc.