Descargar
Compartir
Imprimir esta página
Lawn-Boy 89906 Instrucciones De Instalación
  1. Manuales
  2. Marcas
  3. Lawn-Boy Manuales
  4. Cortacéspedes
  5. 89906
  6. Instrucciones de instalación
Lawn-Boy 89906 Instrucciones De Instalación

Lawn-Boy 89906 Instrucciones De Instalación

Ocultar thumbs

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
Note: For models 10550, 10551, and 10552, follow the
instructions for installing a rear grass catcher in the
Operator's Manual.
English
Contents of the Kit
DESCRIPTION
*Bag Hanger (Wide)
Hanger Clamp
Bag and Adapter Assembly
Chute and Support
Assembly
*
If the hanger supplied is too wide for your mower
handle, contact your Authorized Service Dealer for a
narrower bag hanger (Part No. 613463).
Installing the Kit
WARNING
POTENTIAL HAZARD
The mower blade can throw objects through an
uncovered deck opening, or you could contact
the rotating blade.
WHAT CAN HAPPEN
Contact with thrown objects or the rotating
blade can cause serious personal injury to
bystanders or the operator.
HOW TO AVOID THE HAZARD
Never operate the mower without the mulch
plate, grass chute, or cover plate covering the
opening in the mower deck.
Lawn-Boy, Inc.
2002
All Rights Reserved
Rear Grass Catcher Kit
Model No. 89906
POTENTIAL HAZARD
WHAT CAN HAPPEN
HOW TO AVOID THE HAZARD
QUANTITY
1
2
1. Stop the engine and wait for all moving parts to stop.
1
2. Disconnect the wire from the spark plug before
1
3. Remove the wing screw that fastens the cover plate to
1. Cover plate
1
Form No. 3323-459 Rev B
Installation
Instructions
WARNING
If you leave the wire on the spark plug,
someone could start the engine.
Someone accidentally starting the engine could
seriously injure you or other bystanders.
Stop the engine and disconnect the wire from
the spark plug before installing or removing the
mulch plate.
installing or removing the cover plate or the grass
chute.
the housing (Fig. 1).
2
1
Figure 1
Note: You do not need to loosen or remove the 2
shoulder bolts on the housing that protrude through the
slotted holes in the cover plate (Fig. 2). The cover
plate moves over the shoulder bolt heads.
996
2. Wing screw
Printed in USA

Publicidad

loading

Manuales relacionados para Lawn-Boy 89906

Resumen de contenidos para Lawn-Boy 89906

  • Página 1 Form No. 3323-459 Rev B Rear Grass Catcher Kit Installation Model No. 89906 Instructions Note: For models 10550, 10551, and 10552, follow the instructions for installing a rear grass catcher in the WARNING Operator’s Manual. POTENTIAL HAZARD If you leave the wire on the spark plug, English someone could start the engine.
  • Página 2 Figure 2 1. Shoulder bolts 4. Slide the cover plate counterclockwise to remove it. 5. The rear grass catcher fits onto three different groups of Lawn-Boy mowers: 21-inch Silver and Green Series Figure 4 21-inch L-Series 1. Front deck baffle 2.
  • Página 3 HOW TO AVOID THE HAZARD Figure 6 Use only a Lawn-Boy replacement blade. 1. Toe bar 12. Remove the knob and the bolt that secure the upper and lower left side handle sections (Fig. 8).
  • Página 4 Note: Under normal use, the bag can wear and deteriorate. Check the grass bag often and replace it when necessary with a Lawn-Boy replacement bag. A weakened or inferior bag may let objects pass through, causing injury. WARNING...

  • Página 5: Contenu Du Kit

    être desserrés ou retirés (Fig. 2). La plaque d’obturation se déplace sur les têtes de ces boulons. Lawn-Boy, Inc. 2002 All Rights Reserved Printed in USA...
  • Página 6 4. Faire glisser la plaque d’obturation en sens inverse aux aiguilles d’une montre pour la retirer. 5. Le sac de ramassage arrière peut se monter sur trois types de tondeuses Lawn-Boy: les modèles des séries verte et argent de 53 cm (21”);...
  • Página 7 ATTENTION DANGER POTENTIEL Une lame de rechange non Lawn-Boy risque de heurter la garde de l’éjecteur et de Figure 6 l’endommager lors du démarrage ou de la 1.
  • Página 8 1012 1011 Figure 11 Figure 9 1. Bouton 3. Collier de porte-sac 2. Boulon 4. Porte-sac 17. Accrocher la poignée arrière du sac sur le porte-sac du mancheron. 4. Fixer les colliers du porte-sac aux mancherons dans un 18. Glisser la poignée avant du sac sur la collerette de des autres trous pour obtenir une bonne tension du sac.

  • Página 9: Contenido Del Kit

    (Fig. 2). La placa cobertora se mueve por encima de las cabezas de los pernos de resalte. Lawn-Boy, Inc. 2002 All Rights Reserved Printed in USA...
  • Página 10 1. Pernos de resalte 4. Para retirarla, deslice la placa cobertora en sentido antihorario. 5. El recolector de césped trasero encaja en 3 grupos diferentes de podadoras Lawn-Boy: serie Plata y Verde de 53 cm (21”); Figura 4 serie L de 53 cm;...
  • Página 11 ADVERTENCIA PELIGRO POTENCIAL La instalación de una cuchilla de repuesto que Figura 6 no sea de Lawn-Boy podría golpear y dañar el 1. Cartela separador del conducto durante el arranque o el funcionamiento del motor. 6. Determine la posición correcta del separador del QUE PUEDE SUCEDER conducto usando la configuración de la parte inferior...
  • Página 12 Compruebe con frecuencia el saco recolector de la hierba y reemplácelo cuando sea necesario con piezas originales Lawn-Boy. Un saco fabricado con un material de calidad inferior podría dejar pasar objetos que podrían lesionar al operador.