Descargar Imprimir esta página
Ocultar thumbs Ver también para 95-7018:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (4) #8 x 3/8" Phillips screws
A
®
Metra. The World's Best Kits.
Mitsubishi Outlander
Mitsubishi Outlander
*Visit
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted to match factory dash
95-7018B=Matte black
95-7018CHG=Charcoal gloss
B
C
MetraOnline.com
Sport 2015-2019,
Sport
(ES Trim)
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
2020-2021
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7005; • MITO-03
Antenna Adapter: Not required
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver
Attention: With the key out of the
ignition, disconnect the negative battery
terminal before installing this product.
Ensure that all installation connections are
secure before cycling the ignition to test
this product.
95-7018
REV. 7/8/21 INST95-7018

Publicidad

loading

Resumen de contenidos para Metra 95-7018

  • Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. ® Metra. The World’s Best Kits. MetraOnline.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/8/21 INST95-7018...
  • Página 2: Dash Disassembly

    DASH DISASSEMBLY 1. Using the panel removal tool, gently unsnap the radio trim panel. (Figure A) 2. Remove (4) screws and remove the factory radio. (Figure B) Continue to Kit Assembly (Figure A) (Figure B) 386.257.1187 MetraOnline.com...
  • Página 3: Kit Assembly

    (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. 4. Reconnect the negative battery terminal and test the radio for proper operation.
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians ® Metra. The World’s Best Kits. MetraOnline.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/8/21 INST95-7018...
  • Página 5 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/14/21 INST95-7018...
  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO 1. Suelte a presión y quite el panel de la moldura del radio (Figura A) 2. Quite los (4) tornillos y quite el radio de fábrica. (Figura B) Continúe Ensamble del Kit (Figura A) (Figura B) 386.257.1187 MetraOnline.com...
  • Página 7: Ensamble Del Kit

    Metra recomienda el uso de adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que (Figura A) (Figura B) funcione correctamente.
  • Página 8 386-257-1186 ext. 8300, o envíe un correo electrónico a techsupport@metra- autosound.com. Antes de hacerlo, revise el folleto de instrucciones por segunda vez y asegúrese de que la instalación se realizó...