Publicidad
Idiomas disponibles
Idiomas disponibles
ISO DDIN radio provision
1. Attach the radio brackets to the radio
trim panel using the (4) #8 x 3/8"
Phillips screws provided. (Figure A)
2. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied with
the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS.
4. Reconnect the negative battery terminal
and test the radio for proper operation.
5. Reassemble the dash in reverse order of
disassembly.
KIT ASSEMBLY
(Figure A)
(Figure B)
REV. 7/8/2021 INST95-7018B
3
Publicidad
