Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations
Congratulations and thank you for choosing a split-
type air conditioner. We are sure you will find your
new air conditioner a pleasure to use.
before you use the air conditioner, we recommend
that you read through the entire user manual, which
provides the description of the air conditioner and
its functions.
To avoid the risks that are always present when
you use an electrical appliance, it is important that
the air conditioner is installed correctly and that
you read the safety instructions carefully to avoid
misuse and hazards.
We recommend that you keep this instruction
booklet for future reference and pass it on to any
future owners.
After unpacking the air conditioner please check
it is not damaged. If in doubt, do not use the air
conditioner but contact your local authrised service
centre.
environmental tip
Information on disposal for users
• Most of the packing materials are recyclable.
Please dispose of those materials through
your local recycling depot or by placing them in
appropriate collection containers.
• If you wish to discard this air conditioner, please
contact your local authorities and ask for the
correct method of disposal.
Conditions of use
This appliance is intended to be used in household
and similar applications such as:
• Staff kitchen areas in shops, offices and other
working environments.
• Farm houses.
• by clients in hotels, motels, and other residential
type environments.
• bed and breakfast type environments.
2
table of Contents
Congratulations ......................................... 2
Safety Precautions .................................... 2
Notice for Installation ................................ 3
Tools needs for installation ...................... 4
Product Description ................................. 5
Installation site instruction ....................... 6
quantity of gas ......................................... 7
Outdoor unit installation .......................... 8
Installation of mounting plate .................. 9
Drill piping hole ........................................ 10
Installation of drain hole .......................... 10
Installation of indoor unit ......................... 11
Installation of connection pipe ................. 14
Piping connection-indoor unit .................. 15
Piping connection-outdoor unit ................ 16
Piping formation ...................................... 16
Electrical installation ................................ 17
Check the drainage ................................. 20
Air purging and leakage test ................... 21
Test and Running ....................................... 22
warning
• Do not operate unit with horizontal louver is in
closed position.
• The indoor unit should be installed on the wall
at the height of 2.5 meters or more from the the
floor.
• The indoor unit should be installed allowing a
minimum clearance of 15cm from the ceiling.
• before obtaining access to terminals, allsupply
circuit must be disconnected.
Publicidad
Capítulos
Tabla de contenido
