OPERATION
Activation
• Press Power Switch
on the main screen for 2 seconds.
After 2 seconds, the standby screen appears
and the laser beam is activated.
Distance Measuring To measure a distance:
• Aim at target and press MEAS
The measured distance appears on the main screen.
To change the units of measurement see Settings.
Standby Screen
ure ments
To calculate the sum of two measurements:
1. Take your first measurement.
2. Press
to save the measurement.
3. Take a second measurement and press
The sum of the two measurements appears on the screen.
Subtracting Measurements
10
. All icons appear
.
Measurement Done
Adding Meas-
again.