Accuspray 93-116 Manual General página 5

HAZARD
RISK OF
ELECTRICAL SHOCK
(cont'd)
RISK FROM
FLYING OBJECTS
RISK TO BREATHING
RISK OF FALLING
RISK FROM
MOVING PARTS
RISK OF BURNS
TMPCPOL — 5/1/97
WHAT CAN HAPPEN
REPAIRS ATTEMPTED BY
PERSONNEL CAN RESULT
INJURY OR DEATH BY ELECTROCUTION.
ELECTRICAL GROUNDING:
PROVIDE ADEQUATE GROUNDING TO THIS
PRODUCT COULD RESULT
INJURY OR DEATH FROM ELECTROCUTION.
SEE GROUNDING INSTRUCTIONS.
THE COMPRESSED AIR STREAM CAN CAUSE
SOFT TISSUE DAMAGE TO EXPOSED SKIN
AND CAN PROPEL DIRT, CHIPS, LOOSE
PARTICLES AND SMALL OBJECTS AT HIGH
SPEED, RESULTING IN PROPERTY DAMAGE
OR PERSONAL INJURY.
THE COMPRESSED AIR FROM YOUR COM-
PRESSOR IS NOT SAFE FOR BREATHING! THE
AIR STREAM MAY CONTAIN CARBON MONOX-
IDE, TOXIC VAPORS OR SOLID PARTICLES.
SPRAYED MATERIALS SUCH AS PAINT, PAINT
SOLVENTS, PAINT REMOVER, INSECTICIDES,
WEED KILLERS, ETC.. CONTAIN HARMFUL
VAPORS AND POISONS.
A PORTABLE COMPRESSOR CAN FALL FROM
A TABLE, WORKBENCH OR ROOF CAUSING
DAMAGE TO THE COMPRESSOR WHICH
COULD RESULT IN SERIOUS INJURY.
THE COMPRESSOR CYCLES
CALLY WHEN THE PRESSURE SWITCH IS IN
THE ON/AUTO POSITION.
MOVING PARTS CAN CAUSE SERIOUS IN-
JURY OR DAMAGE IF THEY COME INTO
CONTACT WITH YOU OR YOUR CLOTHING.
ATTEMPTING TO OPERATE
COMPRESSOR WITH PROTECTIVE SHROUDS
REMOVED CAN EXPOSE YOU TO MOVING
PARTS AND ELECTRICAL SHOCK.
TOUCHING EXPOSED METAL SUCH AS THE
COMPRESSOR HEAD OR OUTLET TUBE CAN
RESULT IN SERIOUS BURNS.
UNQUALIFIED ANY
IN SERIOUS REQUIRED ON THIS PRODUCT SHOULD BE
PERFORMED BY AUTHORIZED SERVICE CEN-
TER
NATIONAL AND LOCAL ELECTRICAL CODES.
FAILURE TO
MAKE
CIRCUIT TO WHICH THE COMPRESSOR IS
IN SERIOUS CONNECTED PROVIDES PROPER ELECTRI-
CAL GROUNDING, CORRECT VOLTAGE AND
ADEQUATE FUSE PROTECTION.
ALWAYS
SAFETY GLASSES WITH SIDE SHIELDS WHEN
USING THE COMPRESSOR.
NEVER POINT ANY NOZZLE OR SPRAYER
TOWARD ANY PART OF THE BODY OR AT
OTHER PEOPLE OR ANIMALS.
ALWAYS TURN THE COMPRESSOR OFF AND
BLEED PRESSURE FROM THE AIR HOSE AND
TANK BEFORE ATTEMPTING MAINTENANCE,
ATTACHING TOOLS OR ACCESSORIES.
NEVER INHALE AIR FROM THE COMPRESSOR
EITHER DIRECTLY OR FROM A BREATHING
DEVICE CONNECTED TO THE COMPRESSOR.
WORK IN AN AREA WITH GOOD CROSS-
VENTILATION.
SAFETY INSTRUCTIONS PROVIDED ON THE
LABEL OR SAFETY DATA SHEETS FOR THE
MATERIAL YOU ARE SPRAYING.
NIOSH/MSHA APPROVED RESPIRATOR DE-
SIGNED
APPLICATION.
ALWAYS
STABLE
ACCIDENTAL MOVEMENT OF THE UNIT. NEVER
OPERATE COMPRESSOR ON A ROOF OR
OTHER ELEVATED POSITION.
TIONAL AIR HOSE TO REACH HIGH LOCA-
TIONS.
AUTOMATI- ALWAYS
BLEED PRESSURE FROM THE AIR HOSE AND
TANK,
OUTLET
NANCE OR ATTACHING TOOLS AND ACCES-
SORIES.
DO NOT REMOVE THE PROTECTIVE COVERS
FROM THIS PRODUCT. NEVER OPERATE THE
COMPRESSOR WITH GUARDS OR COVERS
WHICH ARE DAMAGED OR REMOVED.
OR REPAIR
ANY REPAIRS REQUIRED ON THIS PRODUCT
SHOULD BE PERFORMED BY AUTHORIZED
SERVICE CENTER PERSONNEL.
NEVER TOUCH ANY EXPOSED METAL PARTS
ON COMPRESSOR DURING OR IMMEDIATELY
AFTER OPERATION.
REMAIN HOT FOR SEVERAL MINUTES AFTER
OPERATION.
5 — ENG
HOW TO PREVENT IT
ELECTRICAL WIRING OR
PERSONNEL IN ACCORDANCE WITH
CERTAIN THAT THE
WEAR ANSI Z87.1
READ AND FOLLOW
FOR USE WITH YOUR
OPERATE COMPRESSOR
SECURE POSITION TO PREVENT
TURN OFF THE COMPRESSOR,
AND UNPLUG FROM
BEFORE PERFORMING
COMPRESSOR
REPAIRS
ELECTRICAL
APPROVED
THE
USE A
SPECIFIC
IN A
USE ADDI-
ELECTRICAL
MAINTE-
WILL