Errors - Causes And Corrective Measures; Maintenance And Servicing; Maintenance And Cleaning; After-Sales Service And Advice On Using Products - Bosch D-tect 150 SV Professional Manual Original

Numerous unclear signals (see figures H–I)
If numerous objects are shown on the default display screen,
the wall probably contains a large number of cavities. Switch
the operating mode to <Metal> to suppress most of the cav-
Errors – causes and corrective measures
Error
Measuring tool cannot be
switched on.
Measuring tool is switched on
but not responding.
Display: <Slipping Wheel>
Display: <Speeding>
<Temperature over range>
<Temperature under range>
<Strong radio signal detected>

Maintenance and Servicing

Maintenance and cleaning

Check the measuring tool before each use. If the meas-
u
uring tool is visibly damaged or parts have become loose
inside the measuring tool, safe function can no longer be
ensured.
Always keep the measuring tool clean and dry to ensure op-
timum, safe operation.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a dry, soft cloth. Do not use any de-
tergents or solvents.
Ensure that the maintenance flap (7) re-
mains securely closed at all times. The main-
tenance flap must only be opened by an
after-sales service centre authorised to work
with Bosch power tools.
Bosch Power Tools
ities. If the measuring tool continues to display too many ob-
jects, take multiple vertically offset measurements and mark
the displayed objects on the wall. Offset markings are an in-
dication of cavities, whereas markings in a straight line indic-
ate an object.
Cause
Batteries drained
Batteries are inserted with incor-
rect polarity
Measuring tool too warm or too
cold
Wheel losing contact with wall.
Measuring tool moving too fast
Only store and transport the measuring tool in the protective
bag provided.
If the measuring tool needs to be repaired, send it off in the
protective bag.

After-sales service and advice on using products

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Remedy
Change the batteries
Make sure batteries are inserted correctly
Remove and reinsert batteries
Wait until it reaches the permitted temperature range
Press start button (11) and move measuring tool, ensur-
ing lower two wheels stay in contact with wall; on un-
even surfaces, place thin piece of paper between wheels
and wall
Press start button (11) and move measuring tool slowly
over wall
Wait until it reaches the permitted temperature range
Wait until it reaches the permitted temperature range
Measuring tool switches off automatically. If possible,
remove the interfering radio waves, e.g. WLAN, UMTS,
radar, transmitter masts or microwaves, then switch the
measuring tool on again.
1 609 92A 4G1 | (28.08.2018)
English | 21