Settings Menu - Bosch UniversalDetect Manual Original

OBJ_BUCH-3069-001.book Page 26 Tuesday, April 18, 2017 2:39 PM
26 | English
"Settings" menu
To open the "Settings" menu, lift the measuring tool off the base material and
press the button with the symbol shown opposite.
The sound and language settings will remain the same unless changed (i.e. they do not
need to be set every time you switch on the tool).
"Sound"
In the "Sound" sub-menu, you can switch the sound indicating that an object has
been found on and off. The selected setting is shown by symbol b in the status bar.
"Language"
In the "Language" sub-menu, you can select the menu navigation language.
"Reset"
In the "Reset" sub-menu, you can reset the calibration of the measuring tool. It is
advisable to recalibrate the measuring tool if it starts to continuously detect a metal
object without there actually being one nearby.
Follow the instructions in the information area on the touchscreen. Make sure that the
recalibration is carried out at room temperature.
"Help" menu
To open the "Help" menu, lift the measuring tool off the base material and
press the button with the symbol shown opposite.
"Product information"
The "Product information" sub-menu contains information about your measuring
tool.
"Tips"
In the "Tips" sub-menu, you can choose whether you want the instructions on using
your measuring tool to be shown every time you switch it on. In this sub-menu, you
can also choose to view the tips directly.
"FAQ"
The "FAQ" sub-menu contains information about the most common measuring
errors.
"Online help"
The "Online help" sub-menu contains a QR code that takes you to further information
about your measuring tool on the Bosch website.
1 609 92A 3P0 | (18.4.17) Bosch Power Tools