Error Codes - Taurus White & Brown DARKFIRE DOMINO Manual De Instrucciones

want to program for 2s. The hob will start
working.
POWER SELECTION FUNCTION
- Once pressed the mode selector, this mode
will be applied, and a LED light next to the LED
screen will indicate the mode "P" has been
activated.
- Press the butons +/- to change the power
selected. This function has 10 power levels.
- Small hob: 120, 300, 500, 700, 800, 900, 1000,
1100, 1200, 1300 W
- Big hob: 120, 300, 500, 1000, 1100, 1200,
1300, 1400, 1500, 1600 W.
TEMPERATURE SELECTION FUNCTION
- Once you opened the appliance, press 3 time
the mode selector button. The ºC symbol next
to the screen will be indicated.
- Press the vuttons +/- to select the temperature
you desire. Both hobs have 10 levels of tempe-
rature: 60 ºC, 80 ºC, 100 ºC, 120 ºC, 140 ºC,
160 ºC, 180 ºC, 200 ºC, 220 ºC, 240 ºC.
TIMER FUNCTION
- In both, temperature and power modes, if you
push on the button of the function selector,
and you will go to the timer function, where you
will be able to to schedule a swithch off time
between 0:01 and 3:00.
- In order to confirm the time, just leave it during
5 seconds, and it will emit a sound.
- To cancel this function, switch off the induction
plate or sitch of the operation on the hob that
time has been scheduled.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.

ERROR CODES

- The following messages can appear on the
screen:
- E0 → no pot or not detected.
- E1 → Don't reach minimum voltage
- E2 → Too much Voltage for the plate.
- E3 → Thermostat open
- E4 → Thermostat broke
- E5 → Overheating protection
- E6 → Power tube overheating protection
- E7 → Surface sensor failure
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.