Menabo PADDY Instrucciones página 6

To connect the APP to the PADDY Smart Pad press
on the PADDY logo on the pad, as shown below,
until you hear the sound signal.
A new sound signal will confirm the connection between the Pad and the APP. Next to the picture of the child
the battery's charge level of the Pad will appear. The battery charge indicator changes color when the charge
drops, turning red when the battery level is very low. Whenever the buzzer sounds 4 times in a row, the battery
must be replaced: a notification will also be sent to the phone if the screen is off.
6
After the sound signal, keep pressing on the pad.
Hit the "connect" bar, as shown below.
At this point the pad will connect with the APP.
To complete the installation of the APP, press the settings
icon in the upper right corner where you can activate the
vibration, the intermittent flash and select the alarm ringtone.