Use And Care - Kenmore 119.16145210 Manual De Uso

USE AND CARE

 NEVER store a spare LP cylinder under or
near the appliance or in an enclosed area.
 Never fill a cylinder beyond 80% full.
 If the information in the two points above is
not followed exactly, a fire causing death or
serious injury may occur.
 An overfilled or improperly stored cylinder is
a hazard due to the possible gas release
from the safety relief valve. This could cause
an intense fire with risk of property damage,
serious injury, or death.
 If you see, smell, or hear gas escaping,
immediately get away from the LP cylinder
and appliance and call your fire department.
LP Tank Removal, Transport, and Storage

Turn OFF all control knobs and LP tank valve. Turn
coupling nut counterclockwise by hand only – do not
use tools to disconnect. Lift LP tank out of grill. Install
the safety cap onto the LP tank valve. Always use the
cap and retainer strap supplied with the valve.
Failure to use safety cap as directed may result in
serious personal injury and / or property damage.
Tank Valve
 A disconnected LP tank in storage or being
transported must have a safety cap installed. Do
not store an LP tank in enclosed spaces such as a
carport, garage, porch, covered patio, or other
building. Never leave an LP tank inside a vehicle
which may become overheated by the sun.
 Do not store an LP tank in an area where
children play.
Safety Cap
Retainer Strap
4
LP Tank
The LP tank used with your grill must meet the following
requirements:

Use LP tanks only with these required measurements:
12" (30.5cm) (diameter) x 18" (45.7cm) (tall) with 20
lb. (9kg.) capacity maximum.

LP tanks must be constructed and marked in
accordance with specifications for LP tanks of the
U.S. Department of Transportation (DOT) or for
Canada, CAN/CSA-B339, tanks, spheres and tubes
for transportation of dangerous goods. Transport
Canada (TC). See LP tank collar for marking.

LP tank valve must have
Type 1 outlet compatible
o
with regulator or grill.
Safety relief valve.
o
o UL listed Overfill Protection
Device (OPD). This OPD
Safety feature is identified by a unique
triangular hand wheel. Use only LP tanks
equipped with this type of valve.

LP tank must be arranged for vapor withdrawal and
include collar to protect LP tank valve. Always keep
LP tanks in upright position during use, transit, or
storage.
LP tank in upright position for vapor withdrawal
LP (Liquefied Petroleum Gas)

LP gas is nontoxic, odorless and colorless when
produced. For Your Safety, LP gas has been given an
odor (similar to rotten cabbage) so that it can be
smelled.

LP gas is highly flammable and may ignite
unexpectedly when mixed with air.
LP Tank Filling

Use only licensed and experienced dealers.

LP dealer must purge new tank before filling.

Dealer should NEVER fill LP tank more than 80% of
LP tank volume. Volume of propane in tank will vary
by temperature.

A frosty regulator indicates gas overfill. Immediately
close LP tank valve and call local LP gas dealer for
assistance.

Do not release liquid propane (LP) gas into the
atmosphere. This is a hazardous practice.

To remove gas from LP tank, contact an LP dealer or
call a local fire department for assistance. Check the
telephone directory under "Gas Companies" for
nearest certified LP dealers.
OPD Hand
Wheel