Usb Function; Connecting A Usb Device - Manta BBX003 Manual De Usuario

PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set while the unit is in CD mode and playback has
been stopped.
1. Press the MODE Button [8]. The CD Track Display will display "01" and
"PROG" will blink on the LCD screen [5].
Press the /+ [6] or /– [7] button to select the song to be saved in the
2.
program list.
3. Press the MODE button [8] again to save the track. The CD Track Display will
advance to "02".
4. Repeat steps 2 and 3 to save as many as 20 tracks to the program list. If you
attempt to program more than 20 tracks, the LCD screen [5] will read "FUL" .
6. Press the PLAY/PAUSE button [13] to begin programmed play. The first track
in program will appear in the LCD display [5]. Press the /+ [6] or /– [7]
button to show all the programmed songs.
7. To cancel programmed play, press the STOP button [12].
8. As long as the unit remains on and the CD Door [2] is not opened, you can
resume playing the program list at any time by pressing the MODE button [8]
and then PLAY/PAUSE [13].
9. To skip 10 tracks at a time, press and hold the MODE button [8] for two
seconds, and then press the /+ [6] or /– [7] button. To return to normal
operation, press the MODE button [8] again, or wait 3 seconds without
pressing a button.

CONNECTING A USB DEVICE

4. Connect a USB flash memory drive to the USB port [16] located on the side
of the unit.
5. Press the FUNC button [9] to switch to USB function mode. The unit will
detect the USB flash memory drive and read any compatible MP3 files from
it.
6. Press the PLAY/PAUSE button [13] to start playback; press the STOP button
[12] to stop playback.
Remark: Depending on the capacity of the device, the reading can take more than
1 minute.
User's Manual

USB FUNCTION

25
E N