Assembly Procedures - MAURER ZANTE Manual De Instrucciones

STEP 1
1-3. Put the 3 pcs post brackets on each position on the base as shown in the
picture.
1-4. Use 3 pcs M8 x 16 mm bolts to join the post brackets and stand.
STEP 2
2-3. Put the post on the top of 3 pcs post brackets.
2-4. Use 6 pcs M6 x 30 mm bolts and nuts to connect the post to the 3 pcs
post brackets. Tighten the bolts and nuts.
STEP 3
Place the tank housing on the stand.

ASSEMBLY PROCEDURES