Telcoma PASSO FM400 Instrucciones Para La Instalación página 33

GB
PROGRAMMING
Replacement of the MASTER code
The factory set code is
- press and hold the # key for approx. 2 seconds until the keypad beeps
once
- introduce the MASTER code followed by #, the LED remains on
- enter 90#, the LED starts to flash
- enter the new MASTER code followed by # (e.g.: 2233), a beep is heard
and the LED f continues flashing
- enter the new MASTER code again followed by #, a beep is heard and
the LED
¤
completed
Example:
#
2 sec.
FAMILY entry
If used, Family code must be entered using programming unit
123456.
¤
stops flashing. The operation has been successfully
123456# 90#
old
MASTER
2233#
command
¤
2233#
new
MASTER
confirm new
MASTER
33