Telcoma PASSO FM400 Instrucciones Para La Instalación página 34

GB
Introduction of the USER code
- press and hold the # key for approx. 2 seconds until the keypad beeps
once
- introduce the MASTER code followed by #, the LED emains on
- enter:
- 01# for USER code assigned to channel 1
- 02# for USER code assigned to channel 2
- 03# for USER code assigned to channel 3
- 04# for USER code assigned to channel 4
the led ¤ starts flashing
- enter the USER code to be memorised, followed by # (e.g. 1234); a
beep is emitted
- Proceed as above for any additional codes
- The keypad exits the programming phase after approx. 10 seconds of
inactivity
Example:
#
2 sec.
34
2233# 01#
MASTER
code
command
¤
1234#
new USER
code