Publicidad
ADDITIONAL FEATURES - EXTRA
The function BUDGET allows to modify simultaneously
all irrigation times in percentage. You can change the
percentage from a minimum of 10% to a maximum of
200%.
EXAMPLE: the controller is programmed to per-
form a watering cycle at 07:00 AM with irrigation
times of 10 minutes per zone. If we reduce the
percentage of irrigation (BUDGET) to 70%, the
controller perform an irrigation cycle at 07:00 AM
with watering times of 7 minutes per area.
%
budget
SPA
Pressing BUDGET the screen will begin to blink and 100
will appear. Increase or decrease this value using the +
and - button and press ENTER to confi rm and return to
the home scrren.
Attention: When the function BUDGET is changed, the symbol
% remains visible on the main screen. Only if the percentage
BUDGET is 100% the symbol % is not displayed.
If the percentage is changed, watering times will be changed in
the function DURATION ZONE.
No change watering times with the function BUDGET different
from 100%.
28
ADDITIONAL FEATURES - EXTRA
Pressing the EXTRA button will allow you to modify the
Pump and SEnS functions, setting the start of the pump
or turning the rain sensor for a single zone on and off.
%
the display will begin to fl ash and the PUmp will appear
on the screen. Press ENTER to access the function and
toggle between ON/OFF using the + and - buttons,
pressing ENTER to confi rm and move to the next zone.
To return to the initial screen, press EXTRA again.
EXAMPLE: The garden is composed of four areas
of which: 3 zones are for watering the lawn with
sprinklers that are connected to a pump and a
fourth area for watering fl owers under the porch
with drip connected to an aqueduct.
For the three areas with sprinklers you have to turn
on the function SEnS and the function Pump.
For the area with the drip pump I have to turn off
the function SenS and PUmP.
SPA
RAIN s.p.a.
via Kennedy 38/40
20023 Cerro Maggiore
ITALY (MI)
Publicidad
Solución de problemas
