Cleaning The Hepa-Esp Filter; Removing The Filter; Cleaning By Hand; Cleaning By Dishwasher - Boneco F220CC Instrucciones De Uso

12
CLE ANING THE HEPA-ESP FILTER
en

REMOVING THE FILTER

1. Make sure the device is unplugged.
2. Tilt the fan downwards and remove the back grid.
3. Use both hands to push in the locking mechanism of
the HEPA-ESP filter lightly so it can be removed from
the device.

CLEANING BY HAND

1. Use PH-neutral detergent (10 g / 1000 ml) in 40 °C wa-
ter to wash.
2. After washing, rinse with clean water, and dry with a
clean soft cloth.
3. Leave the filter in dry place for at least 5 hours to make
sure it is completely dry before putting it back into the
fan unit.

CLEANING BY DISHWASHER

Do not wash the Filter together with dishes or mate-
rials containing fat and grease.
Only use PH-neutral cleaning detergents suitable for
your dishwashing machine.
Set the cleaning temperature not higher than 70 °C.
Only wash for one wash cycle and for no longer than
2 hours (including the drying).
1. Put the Filter into the dishwashing machine.
2. Take out the filter from the dishwashing machine, and
check for damages or deformations to the Filter. Do not
reinsert a damaged Filter into the device.
3. After washing always check if the filter is completely
dry. If necessary, leave the filter in a dry place for up to
5 hours to ensure it can completely dry before reinsert-
ing it into the fan.
4. Always let the filter cool down to room temperature
before putting back into the fan unit.