mamivac
®
•
to suction other body fluids, such as blood, secretions or mucus
•
to suction outside the medical field, such as corrosive, flammable or explosive
liquids.
•
on other living things
4. Hygiene and cleaning
Before you use the suction kit for the first time, boil components c) to i) in boiling
water for at least 15 min. or use a steam disinfection device, like a sterilizer for
instance. Please observe the manufacturer's notices.
•
Do not use chemical disinfection baths, solvents or abrasives.
•
All parts of the suction kit, except for the air tube and the tube connection, can
be cleaned with commercial washing-up liquids by hand or in the dish washer.
•
Prior to using the kit the next time, clean the parts which came into contact
with milk. It is not necessary to clean the air tube and the tube connection. It is
sufficient to wipe off these parts with a damp cloth.
•
After cleaning, rinse components c) to i) thoroughly with lukewarm water to
remove residues of the washing-up liquid, especially on those parts which come
into direct contact with breast milk. You might use a brush to clean areas which
are difficult to reach.
Prior to assembling the pump, make sure that the diaphragm is
completely dry and undamaged (no cracks, holes, etc.).
•
Assemble the suction kit according to the drawing in
»Layout and components«.
•
The suction kit can be used, cleaned and disinfected for at least 50 times.
© Copyright Gebrauchs.info
suction kits may not be used:
15