Networking The Pdu; Testing Network Connection; Configuration And Operation; Remote Monitoring - Tripp-Lite PDUMNH20HV Manual Del Usario

3. Installation
3.3 Networking the PDU (Only applicable to models with
SNMP Network Card installed)
For instructions on networking the PDU,
please refer to the SNMPWEBCARD Quick
Start Guide on the included CD-ROM.

3.4 Testing Network Connection

Access PDU with Web Browser: After an
IP address has been assigned to the PDU,
attempt to access it with a Web browser
that supports frames, forms and Java™.
Open a Web browser on a computer
connected to the LAN and enter the IP
address assigned to the PDU. You should
be prompted for a password
name is admin and the default password
is admin. After you enter the user name
and password, the PowerAlert Status page
will appear in the browser window. For
B
more information about configuration and
operation of the PDU via the PowerAlert
interface, refer to the SNMPWEBCARD
User's Guide, included on the CD-ROM
bundled with the PDU.
Note for Network Management System
Users Only: Two MIB files - Tripplite.mib
and RFC1628.mib - must be loaded on
each Network Management Station that
will monitor the PDU via SNMP . The files
are provided on the CD-ROM included in
the product package.

4. Configuration and Operation

4.1 Remote Monitoring

The PDU provides remote monitoring, via Web browser, telnet and SNMP-based Network
Management Systems. For more information about configuration and operation of the
PDU via the PowerAlert Web browser interface, refer to the SNMPWEBCARD User's
Guide, included on the CD-ROM bundled with the PDU.

5. Technical Support

Web: www.tripplite.com/support
201110150-93-3050.indb 11
. The user
A
A
B
Email: techsupport@tripplite.com
11
11/9/2011 11:13:14 AM