What's In The Box; Power On/Off; Video Recording - Wiseup V1000 Guia Del Usuario

All manuals and user guides at all-guides.com
II. What's in the Box
-1 × Watch Camera
-1 × USB Cable
-1 × AC110-230V to DC 5V Power Adapter
III. Operation
>> Before using, please make sure your watch camera is fully charged and the internal
memory has been formatted on your PC computer.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The blue
indicator light will flash once and turn off, then the red indicator light will come on and stay
illuminated, indicating the camera has entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again in standby
mode. The blue indicator light will come on and turn off, then the red indicator light will
flash 4 times and turn off.
[Note]:
1). The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.
2). If the camera is running low on batteries, the red indicator light will keep flashing for 10
seconds and turn off. The camera will shut down automatically.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The blue
indicator light will flash once and turn off, then the red indicator light will come on and stay
illuminated, indicating the camera has entered into standby mode automatically.
3.2.2. Press the Power Button once to start video recording. The red indicator light will
turn off.
3.2.3. Press the Power Button for 2 seconds to stop video recording. The red indicator
light will come on and stay illuminated, indicating the camera is back to standby mode.
[Note]:
1). A video clip will be generated and saved every 10 minutes automatically.