Publicidad
Idiomas disponibles
Idiomas disponibles
Field Installed House Side Shield Installation
Tools Required:
#8 Phillips head screwdriver.
1.
Loosen six Phillips screws from LED.
2.
Install house side shield with provided #8 X ½" Phillips
screws. Tighten until house shield is snug. Do not over
tighten. (Figure 6.)
Figure 6.
LED Source
House Side
Shield
Screws (6)
COOPER LIGHTING SOLUTIONS
Installation Instructions – LXF/LXT
Ladder Rest Installation
Tools Required:
5/16" Socket, Wrench.
1.
Insert 5/16-18 x 1" long, hex head machine bolt through
holes from inside of fixture base.
2.
Loosely thread 5/16-18 hex nut on to bolts.
3.
Slip fixture end of ladder rest arm over hex nut, making
sure ladder rest arm fits under ledge on fixture base.
4.
Tighten hex head machine bolt from within fixture base.
(Figure 7 .)
Ladder Rest
Arm (2)
5/16-18 Hex Nut (2)
Figure 7.
IB516007EN
"
5/16-18-1
Hex
Ledge
Head Machine
Bolt (2)
Installation instructions
5
Publicidad
