FILLING THE TANK
ReMindeR: unPluG the aPPlianCe BeFoRe FillinG, seRViCinG oR othe-
Rwise handlinG it.
1. Turn the tank retaining tab.
2. Partly remove the tank from the unit.
3. For a cooler effect, place the free-
zer blocks provided (2) or ice cubes
in the tank before filling (important,
otherwise there is a risk of overflow).
4. Fill the tank.
5. Replace the tank. take care to lock it
with the retaining tab.
OPERATION
Connect the appliance to the power
supply.
Button
: turning on the appliance
and selecting fan speeds
(1 = low / 2 = medium / 3 = high)
Button o: to stop the appliance
: start the air sweep.
Button
Rev 0-21 11 19
IMPORTANT:
- the water for refilling must always be
fresh and clean. never use anything
other than water.
- To avoid the risk of unpleasant
odours: empty the tank completely
and clean it at least once a week;
stop the humidifying function for
15 minutes before switching off the
ventilation.
- The water level should never be below
the «Min» level (risk of damage to the
pump), and never above the «Max»
level (risk of overflow).
- The freezer blocks should be placed in
the freezer before being used.
- Never leave water in an appliance
which is not being used.
- In case of prolonged non-use, drain
the appliance completely (see para-
graph MaintenanCe). If this ins-
truction is not respected, the war-
ranty does not apply.
Button
humidifying air.
IMPORTANT: An air cooler does not
lower the ambient air temperature of
a room. It humidifies the air, making
it feel fresher.
Fabriqué en Chine
:start the water pump and air
Page 21