Publicidad
Idiomas disponibles
Idiomas disponibles
Estimated assembly time: 25 minutes
Tools required:
• #2 Phillips screwdriver
• 3/8" Open end wrench or adjustable wrench
Hardware packet provided with heater may contain more parts than
needed for heater assembly.
Hardware packet contains the following items shown on pages 8
through 10 of your owner's manual:
Knob (1), Propane Tank Retention Chain (1), Retention Hook (2),
and AA Battery (1).
Parts are referenced by designated letter throughout assembly
instructions. Hardware packet contains the following (quantity used
in parenthesis):
Description
A 3/8" Screw (53)
B 10-24 x 1
/
" Screw (3)
1
4
C 10-24 Hex Nut (3)
A
1. Attach emitter assembly to burner support plate with 2 screws (A).
2. Cut wire tie to release grate assembly.
2
Part Number
119620-02
M12345-53
NTC-3BZ
B
C
ASSEmBLy
3. Complete grate assembly by installing 2 screws into grate pillar (A).
4. Position 3 top support pillars over pillar support connectors.
Secure each set with 1 screw (A) each.
5. Locate tabs on grate assembly. Align tabs with slots in burner plate.
Wire Tie
6. Slide grate assembly into slots in burner plate.
www.desatech.com
Add Screw
Burner
Plate
Slot
Tab
123224-01A
Publicidad
