MAINTENANCE
• The appliance must be cleaned and
checked regularly.
• Do not disassemble the protective
grilles during use or maintenance.
• BEFORE
SERVICING,
unPluG the PoweR CoRd!
• Take care that water or other liquids do
not come in contact with the motor or
any other electrical parts during clea-
ning.
• Use a soft, slightly damp cloth to clean
the appliance's exterior and the reser-
voir, and then dry it.
• Do not use THINNERS, ALCOHOL or
OTHER CHEMICALS to clean your
appliance.
• Protective grilles must be cleaned with
a vacuum cleaner or soft brush.
• For the longevity of your device, we
advise you not to use very hard water.
• Clean the humidifier every 2 or 3
weeks as well as the collector and mis-
ter plate.
1. Tank
5. Mister cup
Rev 0-12 11 19
Remove the tank.
Remove the drain nozzle to allow the re-
maining water to flow into the collector.
Carefully disconnect the spray tube from
ALWAYS
the misting cup. Then gently remove the
misting cup to reveal the misting plate.
Clean the misting plate with a cotton
swab and, if necessary, a little detergent
(not aggressive).
Reassemble the assembly in the re-
verse order of the disassembly. Make
sure each item is properly arranged.
• Clean the tank weekly.
• To preserve the longevity of the motor,
regularly place a few drops of lubricant
on the axle.
• For storage in case of prolonged non-
use, ensure that the storage room is
clean and not humid. Protect the ap-
pliance from dust to ensure longevity
2 Mister plate
3. Collector
6. Drain nozzle
7. Mild detergent
Fabriqué en Chine
4. Mister tube
8. Cotton bud
Page 28