Craftsman 125.21417 Manual Del Usuario página 9

KNOW YOUR DRILL
See Figure 1, page i
The safe use of this product requires an
understanding of the information on the
product labeling and in this Operator's
Manual as well as a knowledge of the
project you are attempting. Before use of this
product, familiarize yourself with all operating
features and safety rules.
ADJUSTABLE TORQUE CLUTCH
The drill has a 19+1 position clutch: The
torque adjustment clutch can be turned to
select the best torque for your application.
TWO-SPEED GEARBOX
The two-speed gearbox is designed for
driving or drilling at either LO or HI speeds.
A slide switch is located on top of the tool for
selecting the appropriate speed range.
VARIABLE SPEED
The variable-speed trigger switch delivers
higher speed with increased trigger
pressure and lower speed with decreased
trigger pressure within the selected speed
range.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten
or release the bit in the chuck jaws.
MODE SELECTOR (on the adjustable
torque clutch)
The mode selector allows you to select
among the following modes:
Driver mode (1-19 positions), and Drill mode
( ).
FORWARD / CENTER-LOCK / REVERSE
SELECTOR
The drill has a direction-of-rotation selector
located above the trigger switch for changing
the direction of bit rotation.
Set the selector in the OFF (center-lock)
position to reduce the possibility of accidental
starting when tool is not in use.
FEATURES
LED WORKLIGHT
The LED worklight, located above the trigger
switch of the drill, illuminates when the trigger
switch is depressed. This feature provides
extra light for increased visibility.
KNOW YOUR IMPACT DRIVER
See Figure 16, page iv
The safe use of this product requires an
understanding of the information on the
product labeling and in this Operator's
Manual as well as a knowledge of the
project you are attempting. Before use of this
product, familiarize yourself with all operating
features and safety rules.
VARIABLE SPEED
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure within the selected speed range.
QUICK RELEASE CHUCK
The quick release chuck allows you to quickly
and easily install or remove the driver bit.
FORWARD / CENTER-LOCK / REVERSE
SELECTOR
The impact driver has a direction-of-rotation
selector located above the trigger switch for
changing the direction of bit rotation.
Set the selector in the OFF (center-lock)
position to reduce the possibility of accidental
starting when tool is not in use.
LED WORKLIGHT
The LED worklight, located above the trigger
switch of the impact driver, illuminates when
the trigger switch is depressed. This feature
provides extra light for increased visibility.
9 ― English