Commissioning; Operation; Maintenance And Repair; Decommissioning - Bosch Rexroth LTU350/1 Manual Del Usuario

3 609 929 B47/2008-12 | LTU350/1
7

Commissioning

CAUTION
Risk of damage to persons
and property!
Commissioning of the LTU350/1
servo amplifier requires basic me-
chanical and electrical knowl-
edge.
yOnly qualified personnel (see
"Personnel qualifications" on
page 18) are authorized to
commission the system.
yOnce the device has been
switched off, it cannot be
switched back on again until at
least 30 seconds have elapsed.
If you use the components in an existing
system as a replacement or an extension, you
must install the firmware that is used in the
system.
Before commissioning, check that all plug-in
connections are firmly fitted.
8

Operation

Operation is not necessary while the system is
running.
Bosch Rexroth AG
9 Maintenance and
repair
Cleaning and care
CAUTION
Any dirt or liquids penetrating
the device lead to
malfunctions!
Safe function of the LTU350/1
servo amplifier is no longer
ensured.
yPay particular attention to the
utmost cleanliness when work-
ing with the LTU350/1 servo
amplifier.
Maintenance
The LTU350/1 servo amplifier is
maintenance-free if employed for its intended
use.
Spare parts
Please refer to the address directory under
www.boschrexroth.com and in chapter
"16 Service and sales" on page 28 for the
addresses of our foreign subsidiaries.
10

Decommissioning

For details on how to disassemble or replace
the LTU350/1 servo amplifier, please refer to
chapter "11 Disassembly and replacement"
on page 26.
25/84