Unpacking the box
Recommended parts
In colder climates, we strongly recommend the use of one or more thermal earth tubes to help keep the vertical water
•
supply line from freezing. The thermal earth tube(s) must be long enough to extend 1 foot (305 mm) below the normal
frost line.
¾ inch NPT male fitting to connect the water supply line to the ¾ inch flex line inside the tank. If your water supply line is
•
more than ¾ inch in diameter, you will also need an adapter.
Insulated thermal earth tube(s) suitable for your environment and frost line depth
•
Recommended tools
Adjustable wrench
•
Pipe wrench
•
Measuring tape
•
Utility knife
•
Level
•
⅜ inch socket or ratchet wrench
•
Hammer drill
•
½ inch masonry bit
•
Hammer
•
½ inch ratchet wrench
•
Caulk
•
6