Beacon 1356914 Manual De Instrucciones Y Propietario página 9

INFLATING DROP-STITCH FLOOR
Inflate the floor using the included hand pump. Insert the hose into the
valve (make sure valve is in the UP position) and turn hose clockwise
until it locks into place. Inflate manually using the PSI pressure gauge
on the pump to confirm the desired PSI of 8-10 PSI. Once you have
reached the desired PSI twist hose counter-clockwise to remove.
Replace valve cap.
SEAT INSTALLATION
Easily adjustable hook and loop base Easily adjustable seat back
Place the seat on the floor of the kayak facing forward with the cushion
on the floor (in the center of the Hook and loop strips). Attach the clips
from the ends of the webbing straps on front and on back to the
D-Rings in front of and behind the seat. Sit in the seat and find a
position that is comfortable for you. The recline of the seat can easily
be adjusted forward or backward by tightening or loosening the web-
bing straps. The location of the seat cushion can be adjusted by
picking up the seat and moving it forward or backward. Hook and loop
on the floor will lock the seat cushion into position.
STORAGE OVERVIEW
8