Cleaning The Lavatory; Troubleshooting - Toto LLT152 Instructivo

Ocultar thumbs Ver también para LLT152:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING THE LAVATORY

Wipe the bowl with a soft cloth and warm soapy water or mild cleaning
detergent. Dry the bowl using a soft clean cloth.
Clean oily dirt, residue, etc. off the bowl with a soft cloth and ethyl alcohol.
Regularly drying the upper face of the bowl will help maintain the appearance
of the lavatory.
To remove a clog in the drain, gently pull the drain cover
up and out to access the drain and remove the clog.
Plase read this section to see if you can troubleshoot the problem before requesting
a repair. If you still cannot solve the problem after reviewing this section, please
contact TOTO® (see the last page of this manual for contact information).
Problem
Has the LED connector been connected to the power
adapter connector?
Has the switch on the power adapter been turned on?
Has the wall switch been turned on?
Is the circuit breaker thrown?
Is the wiring or LED damaged?
Problem
Is the LED faded due to product lifespan?
(The lifespan is approximately 25,000 hours and the
brightness drops by 70%.)
5

TROUBLESHOOTING

The bowl does not light up.
Tests and results
The light of the bowl is faded.
Tests and results
drain
Solutions
Make the proper wiring connections.
Turn the switch to the on position.
Have a professional verify that the wall
outlet works.
Check that the circuit breaker is not thrown.
Replace any damaged parts.
Solutions
Replace the LED with a new one.
(See the "Replacing the LED section" in this
manual.)
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido