Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10
CMA Series
CMA Series Controls
(1)
(5)
(6)
(7)
(8)
(9)
(10) (11)
(1)
(5)
(6)
(7)
(8)
(9)
(2)
(3)
(12)
(13)
(14)
(2)
(3)
(11)
(12)
(13)
(14)
(15)
Controls
(4)
(15)
(16)
(4)
(16)
(1) INPUT VOLUME – Adjusts the volume of
INPUT ROUTING – Controls the routing
(10)
the various audio sources. Each channel has
for each input. (not available on CMA1201)
an associated LED that will light green to
See 'Getting Started' section for details.
indicate active signal, and light red to indicate
PHANTOM 48 V – Controls phantom power
(11)
clipping.
per section of 4 inputs. (CMA1201 all inputs)
(2) EQ KNOBS – Adjust the bass and treble for
EUROBLOCK INPUT – Accepts 3-pin
(12)
the master output(s).
Euroblock connectors for balanced mic or
(3) MASTER VOLUME – Controls the overall
line-level sources.
output level. The associated LED(s) will light
MIC/LINE SWITCH – Optimizes the input gain
(13)
green to indicate active signal, and light red to
for mic or line-level sources.
indicate amplifier limiting/protection.
RCA INPUTS – Allows the connection of
(14)
(4) POWER BUTTON – Turns the unit on and
stereo unbalanced sources, which will be
forces it into standby. The LED will indicate
summed to mono.
power status.
PRIORITY – Additional 2 pins that activate
(15)
(5) MAINS CONNECTOR – Connect the IEC cable
the priority ducking function when shorted
to a mains outlet.
together.
(6) CONFIG SWITCHES – Configure the output
VOX KNOB – Sets the input level that will
(16)
channel for the connected load type.
engage the priority ducking function.
See 'Getting Started' section for details.
(7) OUTPUT – Connect your speaker(s).
(8) AUX OUTPUT – Line-level pre-master output
signal to drive additional zone(s).
(9) REMOTE –Allows the connection of an
external volume control module per channel.
CRC-V series of wall controllers are available as
separate accessories.
11
Quick Start Guide
Publicidad
Tabla de contenido
