Oxygenics POWERFLOW RV Instrucciones De Instalación

P
OWER
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise
direction, screw end
of hose to the taped
portion of the shower
arm. Hand tighten
only.
ATTENTION:
WASHERS
PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted
into both hose ends for
proper installation.
F RV
LOW
STEP 2
Remove any remnants
of old plumber's tape
and flush out shower
pipe for 5 to 10
seconds.
STEP 5
Attach other end
of hose to base of
handheld and hand
tighten.
EASY TWIST SPRAY
SELECTION
Enjoying multiple
spray patterns
during your shower
has never been
easier. With the
PowerFlow's easy
twist design, simply
rotate the easy spray
selector for a quick
spray change.
STEP 3
Wrap plumber's tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 6
Attach double stick
tape provided to back
of holder and press
firmly to clean, dry
shower wall. Place your
new handheld shower
head into holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.