Oxygenics POWER SELECT Instrucciones De Instalación

P
OWER
EASY INSTALLATION
INSTRUCTIONS
STEP 1 STEP 2
Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape
turn the existing and flush out
shower head in a shower pipe for
counterclockwise 5 to 10 seconds.
direction.
STEP 4 STEP 5
In a clockwise Attach end of
direction, screw hose to handheld
handheld holder holder and hand
onto the taped tighten.
portion of shower
arm. Hand
tighten only.
ATTENTION:
SMOOTH END OF HOSE ATTACHES
TO SHOWER HEAD
EASY TWIST
SPRAY SELECTION
Enjoying multiple spray patterns
during your shower has never
been easier. With the PowerSelect's
easy twist design, simply rotate
the easy spray selector for a quick
spray change.
S
ELECT
STEP 3
Wrap plumber's umber's
tape clockwise lockwise
3 or 4 turns 4 turns
around threaded und threaded
end of shower nd of shower
arm. arm.
STEP 6
Attach end of
hose to base of
handheld and
hand tighten.
Insert your new
handheld shower
in holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST
For use with automatic
compensating valves
rated at 1.31 GPM
(4.97 L/min) or less.