Lenco ODR-150 Manual Del Usuario página 11

Now you have finished the time/date configuration.
Auto update: Choose from what source the radio will update the time automatically.
You can choose the following options:
Any:updates the time from DAB or FM signal
-
- From Digital Radio-update:updates the time from the DAB signal
- From FM: updates the time from an RDS channel
No update: If you want to set the time manually
-
Set 12/24 hour:Rotate the "Enter" knob to choose to set 24 hour- or 12 hour time display
Set date format: Rotate the "Enter" knob to choose DD-MM-YYYY or MM-DD-YYYY.
Backlight: Timeout: Off-30 sec-45 sec-60 sec-90 sec-120 sec-180 sec
Language: English, Español,Français, Italiano, Nederlands, Norsk, Polski, Suomi, Dansk, Deutsch.
Factory Reset: Press the "Enter"knob and choose 'Yes' to start factory reset.
Software Update: Press the "Enter" knob and choose "yes"to update the software if needed.
Note: this function should only be used by our technical service department, since updating
needs a special cable). If you accidently selected this option, please short press the reset
button with a small paperclip. The radio then can be used again.
SW version: Press "Enter" to view system version.
Using the radio- FM MODE
Turn the radio on, press the "Mode" button repeatedly and select the FM mode. The display will
show 'FM' and the current station name or frequency if RDS is not available.
Manual search
To search manually, first short press the stations button and then turn the "Enter" knob right to scan
upwards or turn the ok knob left to scan downwards.
11