Controls & Features - MTD 19A70063OEM Manual Del Operador

Plow Lift
Lever
Pivot Release
Lever
Plow
The plow is used to push snow/dirt/gravel, etc. and can be angled left or right
and raised or lowered.
Plow Lift Lever
The plow lift lever is used to raise and lower the plow. Squeeze the trigger
against the handle, press the handle down and slowly release to lower the
plow.
Pivot Release Lever
The pivot release cable lever is used to change the angle of the plow. Squeeze
the trigger against the handle and push the plow pivot handle forward to angle
the plow to the left or pull back on the plow pivot handle to angle the plow to
the right. Release the handle to secure into position.
CONTROLS & FEATURES
Plow
Skid Shoe (Not shown)
The skid shoes are located on the bottom of the plow and can be adjusted up
or down depending on the conditions. The skid shoes set the distance between
the ground and the bottom of the plow.
Shave Plate
The shave plate maintains contact with the surface to be plowed as the plow is
pushed forward.
6
Shave Plate
(Plow Cutting Edge)