Control Panel; How To Use - Vornado CYLO50 Manual Del Usuario

CONTROL PANEL

FILTER REPLACEMENT LIGHT
POWER ON/OFF
FILTER REPLACEMENT
8 English
FAN SPEED LIGHTS
QUICK CLEAN,
HIGH, MEDIUM,
FAN SPEED
LOW

HOW TO USE

POWER
Function ON and OFF by pressing the Power Button.
FAN SPEED
4 fan speed settings to meet any need. Select Quick Clean, High,
Medium or Low by pressing the Fan Speed button.
QUICK CLEAN
The Quick Clean filtration setting can be used to rapidly filter the air
when airborne particle levels are high. In Quick Clean Mode, you will
immediately notice a dramatic increase in airflow that will allow the
unit to provide maximum filtration. Due to increased sound levels, use
of this mode is recommended only as conditions require.
Note: Dust and allergens are most airborne when persons and pets are
active in the room. For best results, set the unit on Quick Clean during
these times for high demand cleaning and circulation. Set the unit to a
lower setting for quieter operation when activity is reduced.
FILTER REPLACEMENT
Equipped with Filter Replacement indicator light to show when
it is recommended to change the filter. Please refer to FILTER
REPLACEMENT for instructions. This feature is controlled by time
of use. The light will illuminate after 4,500 hours of run time has
accumulated.
Note: User environments will differ. The filter replacement time is
based on average use situations. If you are using the air cleaner in a
more demanding environment, you may need to change your filter
more frequently. In less polluted environments the filter life may
extend beyond the notification.
English 9