General Notes; Identification Obligation - 4rain MODULARIS 2.500 L Instrucciones Para Instalaccion, Uso Y Manteniniento

1.1 Safety
Observe the relevant accident prevention regulations of the trade associations according to BGV C22
during all work.
Furthermore, observe the relevant regulations in respect of installation, assembly, repair, maintenance,
etc. You will find relevant information in the respective sections of these instructions.
During all work on the system or parts thereof always shut down the entire system and secure it against
unauthorised re-starting.
Always keep the tank cover closed except when working in the tank. Otherwise there is a high risk of
accident.
4rain offers an extensive assortment of accessory parts which are all matched to each other and which
can be extended to complete systems. The use of other accessory parts can impair the functional reliabil-
ity of the system and invalidate the warranty for any resulting damage.
1.2

Identification obligation

All service water pipes and outlets must be identified in writing with the words "Not drinking water" or in
the form of images in order to avoid inadvertent connection with the drinking water mains even after a
number of years. Mix-ups, e.g. by children, may still occur even in the case of correct identification. All
service water extraction points must therefore be installed with valves with child-proof locks.
info@4rain.eu
www.4rain.eu
1.

General Notes

10 / 32