JANE REVOLUTION Manual Del Usuario página 27

EN
4.- FORWARD FACING FRONT POSITION WITH THE RIGID SEAT
Your child wants to investigate things more than ever, he wants to see the world exactly how you see it.
Now is the time to change his position and let both of you enjoy your trips out.
Follow the steps below that are shown in the diagrams on page 9.
STEP 1.- Make sure that the baby carrier has the seat fitted in the pocket of the front part of your Revolution. If it doesn't, insert the rigid mould into the pocket. Check that the seat is in perfect
condition (like when you bought it from the shop) and has not suffered any wear and tear.
STEP 2.- Store the leg insert option in its interior pocket and put the abdominal belt around your waist, fasten it with the buckles and adjust it to the right size for you.
STEP 3.- Fasten the buckles of the shoulder straps to the buckles at your waist. They will click when securely fastened. Tighten the abdominal belt by pulling the short end. Roll any surplus strap
up and secure it with the elastic band so you do not trip over it. Now you can put your shoulder straps on whenever you need simply by putting your arms through the straps.
STEP 4.- Make sure that the flap or head pad is not in the headrest position. Check that it is fastened down by the buttons on each of your straps (page 4 letter O).
Your child's chin should rest on the top part of the flap or pad. Unfasten the side flaps that fit the seat and join them together so your child can move his legs freely and you are not forcing him
into an uncomfortable position (page 4, letter M).
STEP 5.- Pick your child up with his back to you and place him in the seat without letting go of him and pressing him against your chest with one hand, use your other hand to hold the base of
the baby carrier or the seat.
Raise the front part of the baby carrier to your child's chest and raise the straps of the baby carrier, first put one strap on while still holding your child and then put the other strap on. Do not
let go of your child at any time.
STEP 6.- If your baby does not weigh enough to be carried in this position, (the child's weight may vary depending on his age, approximately +15 Kilos) you will need to fasten the safety strap,
see (P) (page 4 PARTS), to the button found on the abdominal belt to reduce the side space and provide greater side protection.
STEP 7.- Reach behind you with your arms and fasten the buckle on your back that holds the straps together so they remain perfectly balanced and do not slip down your arms.
Lastly, make sure that the buckles are securely fastened, and adjust the height and width of the straps by pulling them.
Note: If you want to use this option without the rigid seat, follow the same steps without inserting the grey seat mould into the pocket.
To place your child in the same position without the seat, follow the same steps above missing out step 1 when the mould is fitted into the central pocket.
5.- JUST THE RIGID SEAT
Your REVOLUTION baby carrier includes a completely innovative accessory that is a rigid seat built into the front waist belt. This type of baby carrier will be more comfortable for your child as
it will support his bottom and his back in a seat that will make the carrier more relaxed and balanced. It will also be beneficial for your back and waist as well, because it means you won't have
to bend (which normally happens) at all to settle the child's weight at your waist. This version is safe for your child from the age of six months or when your baby is able to sit up unaided without
falling.
WITHOUT SEAT WITH SEAT
SUMMER / WINTER OPTION
Your multifunctional, dynamic REVOLUTION baby carrier is designed to be used all year round. Thanks to its removable cover (page 4 N), that can be stored in the pocket of the wide abdominal
belt, you will always have the option of wrapping your baby up warmly whenever you need to. It is easily fitted with its 4 buttons on the top part and 2 press studs on the bottom part. See page
9.
27